SafeLine LYNX 2.8.2 - App Store

SafeLine LYNX version 2.8.2

Updated At: 2023-05-17

Changes: May 17, 2023 Version 2.8.2 . SL6: Added fire mode push to talk configuration parameter. Requires firmware version 4.94 or higher . SL6: Updated default values for SL6 demo configuration

SafeLine LYNX version 2.8.2

Updated At: 2023-05-17

Changes: May 17, 2023 Version 2.8.2 • SL6: Added fire mode push to talk configuration parameter. Requires firmware version 4.94 or higher • SL6: Updated default values for SL6 demo configuration

SafeLine LYNX version 2.8.1

Updated At: 2023-05-16

Changes: May 16, 2023 Version 2.8.1 . SL6: Added fire mode push to talk configuration parameter. Requires firmware version 4.94 or higher . SL6: Updated default values for SL6 demo configuration

SafeLine LYNX version 2.8.0

Updated At: 2023-01-16

Changes: Jan 16, 2023 Version 2.8.0 . SL6: Added GSM offline restart configuration parameter running firmware 4.84 or higher . Fixed issue where LYNX would always update device info to Orion G1 even if info already was the same on Orion G1 when connecting . Added support configuration email feature where the user could send all the configuration parameters and their current values as text in a email to support

SafeLine LYNX version 2.7.0

Updated At: 2022-05-09

Changes: May 9, 2022 Version 2.7.0 . Added default text and icon to configuration storage view and scan view if no items appear . SL1/SL2: Fixed crash when going into diagnostics and it should now function correctly . SL6+: Added support for downloading and importing SLCF type of files. This requires bootloader version 2 or greater to be installed. Binary type files will now only work for bootloader versions 2 or below. . LEO4/LEO5/LEO7: Removed options CAN encoder and External position BLE as they are not used from main mode list when using SPC main operation mode . LEO4/LEO5/LEO7: Fixed floors group being disabled when switching main mode when in SPC main operation mode to binary or another main mode which should enable floors . Fixed so you are able to bypass error configuration view that pops up if there are any errors in the configuration when it’s done loading. . MX2/MX3/MX3+: Fixed a bug where the configuration factory reset feature didn’t work . LEO4/LEO5/LEO7: Fixed a bug where the configuration factory reset feature didn’t reset specific main operation mode values to default. . LEO7: Added support for 24 input maps. Requires firmware version 2.9.14 or higher . Added descriptions to a lot of configuration items that did not have one. . Reordered the feature tiles so it’s easier to find the features that are used most without having to scroll to find. . Decreased transparency for disabled/read-only configuration items so it’s easier to read. . Added options for the user to clear the cache upload log to orion or try to upload cached data on the phone to orion again in cases where it failed and the cloud icon shows a cross. These options can be found by clicking the cloud icon and the user will be greeted with a more specific error on what went wrong. . SL6/SL6+: Added the bus test to main diagnostics page to let the user test the port on SL6 without having to have a voice station plugged in and then going to voice stations diagnostics page and unplugging the voice station to test the SL6 bus port. The main diagnostics page bus test will always test on bus 1. The voice station specific bus test still remains in the voice station diagnostics page. . SL6: Fixed a bug in simulating an emergency or test alarm if using a SL6 with hardware version of 1 or below, where it would call the wrong number. Also, removed requirement of showing the simulate alarm feature list so the view should not be blank anymore if using firmware version below 4.20. In addition, a compatibility warning popup now appears if you are attempting to connect to a SL6 that has a much older firmware version than hardware version as features might not work as expected.

SafeLine LYNX version 2.6.0

Updated At: 2021-12-11

Changes: Dec 11, 2021 Version 2.6.0 . Devices in scan view are now grouped by device name . Added support feature available in toolbar in every view to capture current screen of phone and compose an email template for sending to Safeline support . SL6/SL6+: Added support for showing type of input (NO or NC) in parenthesis next to input 1 and 2 in diagnostics . SL6/Sl6+: Added device configuration wizard for this device to easier set it up if it is new . LEO7: Added support for this device in the app . Added a new feature where the user can bookmark configuration items, they use frequently by pressing the star icon. They can see them in a list in a separate view. This view can be accessed under configuration bookmarks. . The local storage options for saving copying, and downloading a configuration from Orion now appears as a separate feature in the device feature view under configuration storage . SL6/SL6+: Added the option to update firmware via Bluetooth on SL6 devices running bootloader version 3.0 or greater. This option can be accessed by pressing the firmware update button in the scan view for a device or by going into the device feature view under firmware. . SL6/SL6+: Updated default value to 3 minutes for Inter-SMS timeout for the SMS binary protocol. This parameter requires firmware version 4.83 or above . SL6/SL6+: Added so only available/online interfaces appear in Alarm simulation. Auto will always be visible . SL6/SL6+: Fixed bug where simulate alarms feature was not visible on devices running software version 4.20 or lower . LEO4/LEO5/LEO7: Fixed bug where if changing operation mode, specific items only included in the operation mode was not loaded correctly. Also, writing parameters should now be reflected on the device without having to go in and out from the configuration feature . SL6/SL6+/GL1/GL6: Updating firmware via USB should now provide better user feedback and give a message when the update is finished . SL6/SL6+: Installing sound files via USB will give a complete message when install is finished . LEO4/LEO5/LEO7: Updated/removed configuration item descriptions that had no text . SL6/SL6+: Updated max input value to 65535 minutes if selecting LMS/SMS as input for input 1 and 2 under IO in SL6 configuration . SL6/SL6+: Removed read-only serial number item from the configuration as it can be viewed in device feature view and moved IMEI number to device feature view . GL6/GL6 P2: Support connecting to the app via Bluetooth dongle and accessing device configuration . SL6/SL6+ Changed default value to 30 for value parameter if value is 0 for input 1 and 2 if choosing filter as input function. If device firmware version is greater than or equal to 4.83 and not 4.90, a new field has been added called filter delay, where the value is inputted into, and the old value field is disabled. If the firmware version does not match the above, the old field is used. . SL6/SL6+: Added distress message period parameter to the configuration under voice messages. This requires firmware 4.83 or above but is not included in 4.90 . SL6/SL6+: Added interface online check retry delay parameter to the configuration under IO. This requires firmware 4.83 or above but is not included in 4.90 . Added error resolve view to easily resolve configuration errors that happened when loading the configuration.

SafeLine LYNX version 2.5.0

Updated At: 2021-09-21

Changes: Sep 21, 2021 Version 2.5.0 . MX3/MX3+: Added diagnostics feature . MX2: Added diagnostics feature . SL6: Added diagnostics feature . SL3000: Added diagnostics feature . SL6/SL6+: Added helpful description for: Relay 1 and 2 and relay 1 + 2 in inputs and outputs in the configuration . The description is now hidden by default and can be expanded by pressing the expand button for all configuration items that have a description in the configuration

SafeLine LYNX version 2.4.0

Updated At: 2021-06-30

Changes: Jun 30, 2021 Version 2.4.0 . MX3/MX3+: Added mic sensitivity option in the configuration under miscellaneous. This option allows the user to set the volume reduction of the microphone . Added more spacing between items in what’s new . Added the ability to search the device configuration. This feature is accessible through the magnifying glass icon in the toolbar of the configuration view . Renamed connect button text when connecting to a device that requires a password from "enter" to "connect" for English and "Gå in" to "Anslut" for Swedish . SL6/SL6+: Fixed a bug where if trying to simulate an emergency alarm twice the app would not do anything the second time . Added push notification support to the app

SafeLine LYNX version 2.3.0

Updated At: 2021-04-27

Changes: Apr 27, 2021 Version 2.3.0 . Fixed a bug where the config sometimes could not be reset to factory default on SL3000 . Added a remember email button to the login screen that enables the app to cache the login email so the user doesn't need to type it in the next time they login . Added a more friendly user message for non localized key: "FAILED_TO_ENTER_TEST_MODE" . LEO4/5: Fixed a bug where sometimes the same sound file would be set for multiple config items when picking it from the sound file browse dialog . Fixed a bug where custom color config items in the LEO 5 theme config would not disappear when selecting a predefined color . Fixed a bug where items would not animate to create a simulation of the different values in demo SL6 diagnostics . Fixed a bug where phone number view was visible in device info for non telephone devices. . Fixed sync icon showing pending status indefinitely for the group that is being loaded in the config if the user tries to exit the config while it's still fetching . LEO4/5: Fixed a regex validation bug for timestamp config items . LEO4/5: Fixed config weekday picker showing Sunday twice for Swedish locale and fixed dialog title not being localized . Fixed feature tiles being hard to read

SafeLine LYNX version 2.2.1

Updated At: 2021-03-26

Changes: Mar 26, 2021 Version 2.2.1 . Auto enable BLE option in SL6+ config. Requires firmware version 4.82 or above to see . Renamed "DB special" to "collective fault" for relay output 1 options in SL6 config . Fixed sl6 with BLE external module not displaying serial number in device features . Fixed sl6 with BLE external module not displaying device information in device features . Fixed app crashing when navigating out of PDF view . Added minimum firmware version to 5.0 for international number prefix in SL6 config . Renamed "Alarm button" to "local button" for relay output 1 options in SL6 config . Added links to enable bluetooth and location settings to permissions view . Added error description to error dialog for not selecting a company in device information view . Fixed cloud icon showing wrong status . Added GSM network select option to SL3000 on firmware version 2.3 and above . Fixed formatting for firmware versions in scan and device view . Fixed config not fetched correctly for devices using CAN protocol . Support error type: "IP COM timeout" in SL6 config . Fixed bug on MX2/MX3 where if choosing filter or call delay in External input for monitoring the value field was still disabled. . Fixed bug where SL6+/MX3+ devices were sometimes disabled in scan view . App will no longer overwrite config values with a default value if it fetches a value it can't read from device when the configuration is loading. The config item will be marked with an error and a error description will be shown on what the error is.